Engineering Technology 2

  • Tasks and Reference Materials 

     
                    Tutorials and Assignments: True Length Line, True Size Surface and Intersections
     
     
    PreUnit: Creo Basics
                      Tutorials and Assignments: Introduction to Creo Extrude Tutorials, Revolve Tutorial, Design Parts 1-3, Tutorial Creo Layout and Dimensioning
     
    Pre Creo Review : Review Part
              Design in Creo > Layout and Provid 3 Overall Dimension w/ Centerlines
     
    Unit 1: Revolves
               Tutorial and Assignments: Revolve Solid Model Tutorial, Parts 20-21, Revolve Layout Tutorial
     
    Unit 2: Auxiliary Drawings
               Tutorials and Assignments: Auxiliary Sketches, Reference Auxiliary Views, Part 10-11 Auxiliary Parts
    Unit 3: Assembly Design and Layout Basics
                Tutorials and Assignments: Tutorial Lego Assembly, Assembly 1 and 2, Reference Documents for Assembly, Explode Views, Cover Page Layout and Parts Layout
    Unit 4: Threads
                Tutorials and Assignments: Thread Chapter Reading, Tutorial Nut and Bolt Simplified Threads, Assembly 3, Tutorial Sweeps/Helical Sweeps, Assembly 4
    Unit 5: Mechanized Assemblies
                Tutorials and Assignments: Develop the use of advanced connections to apply motion to an assembly (i.e. pin, slider, cylinder, slot, etc. connections).  Tutorials show the use of servo motors and view creation to develop motion analysis and video exports.

     

     
     
    If you see the following sizes at two places past the decimal on your worksheets adjust to three or four places past the decimal on your solid model only
    1/16 or 0.06 = 0.0625 
    1/8 or 0.12 or 0.13 = 0.125
    3/16 or 0.19 = 0.1875
    1/4 or 0.25 = 0.25
    5/16 or 0.31 =0.3125
    3/8 or 0.37 or 0.38 = 0.375 
    7/16 or 0.44 = 0.4375
    1/2 or 0.50 = 0.50
    9/16 or 0.56 = 0.5625
    5/8 or 0.62 or 0.63 = 0.625
    11/16 or 0.68 or 0.69 = 0.6875
    3/4 or 0.75 = 0.75
    13/16 or 0.81 = 0.8125
    7/8 or 0.87 or 0.88 = 0.875
    15/16 or 0.94 = 0.9375

    Approved Scales
    Any scale that is found on a drafting triangular scale is approved
    Common Scales
    2.000 = 1.000
    1.500 = 1.000
    FULL or 1.000 = 1.000
    .750 = 1.000
    .500 = 1.000
    .375 = 1.000
    .1875 = 1.000
    .250 = 1.000
    .125 = 1.000

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

              Design in Onshape > Layout and Fully Dimension w/ Centerlines
    PreUnit: Creo Basics
                      Tutorials and Assignments: Introduction to Creo Extrude Tutorials, Revolve Tutorial, Design Parts 1-3, Tutorial Creo Layout and Dimensioning
     
     
              Design in Onshape > Layout and Fully Dimension w/ Centerlines
     
     
     

Related Files