• Coordinate Systems (Download Files or See Teacher for Handout)
    Direction: Based on a set Origin Point find the Coordinate Location for the Identified points on each drawing
    Reference: Trig Formulas  
    PDF File: Coordinate Sheet 1
    PDF File: Coordinate Sheet 2
    PDF File: Coordinate Sheet 3
    PDF File: Coordinate Sheet 4
    PDF File: Coordinate Sheet 5 

    Introduction to Programming

    Programming
    Reference Video: CNC Tool Change
    Reference Sheet: G and M Code
    Sample Code: Sample G and M Code Program
    Reference: Drill and Tap Depth Formulas
    Website: NCViewer.com
    Directions
            Step 1: Complete the Coordinate Sheets > Have the teacher verify the correct coordinate values
            Step 2: Fill in the correct G and M Code in the spaces listed
            Step 3: Test the code on CNC machine or simulation software like NCViewer.com
    PDF File: Program 1
         Download: Base Code 
         NOTE: This is a notepad file.  Select Link > Code will open in browser > Right Click anywhere on the screen > Select Save > Select Save Location > Open File > File should open in Notepad 
         Instructions: Add the code where the underscores are located.  Be sure to delete the underscore characters
    PDF File: Program 2
            NOTE: File is setup as an editable PDF Document
            Submission: Email the PDF of the Program and a Screenshot of the simulation on NCViewer.com
    PDF File: Program 3
         NOTE: File is setup as an editable PDF Document
         Submission: Email the PDF of the Program and a Screenshot of the simulation on NCViewer.com  
    Reference: Trig Formulas